Kaleidoscope Industrial Enamel Paint White G

 Delivering Superior Value.

A hard drying high gloss enamel paint for Machinery or metal surfaces.

Preparation for Metal, Iron or Steel:

New: New galvanise, iron, steel and aluminium surfaces should get one coat of Etching Primer followed by one coat of Zinc chromate Metal Primer and two coats of Industrial enamel.

Previously Painted:

Remove wax, grease, dirt or flaking material. Remove rust with Rust Remover and spot prime bare metal areas with Zinc chromate metal Primer. Allow to dry overnight. Then apply one or two coats of Industrial enamel by brush or roller or spray.

For brush application: Thin with 470 ml of Kaleidoscope 2000 thinners.

For Spray Application: Add up to 470 ml of Kaleidoscope 2003 thinner per gallon. Allow overnight drying between applications.

Dries within 3 hours. Coverage: 30-37 Sq meters per US gallon