Kaleidoscope Bright Aluminium 260 degrees C paint G

To be used as protective coating on iron, steel, galvanise and similar surfaces.

New galvanise and aluminium surfaces should first be primed with one coat of Etching Primer .

Previously painted:

wire brush and remove rust from metal surfaces by application of Rust remover. Prime with appropriate Zinc primer and allow to dry.

Then apply two to three coats of Aluminium paint by brush or spray.

Touch dry 2-3 hours

Allow 8-12 hours for drying between coats

Coverage 8-10 sq meters per gallon

Clean brush with Kaleidoscope 2000 thinners.