Water pump Pentax 3/4 hp with smarthead CAM75N/00

125 V       Made in Italy

166 L/ min

max 10 bar

inlet/ outlet 1"

Safety system avoids dry running operation

Pump working LED (on)

12 months limited warranty

Starting:

1. Be sure that the pump is correctly primed, then gently open one tap of the installation.

2. Connect the device to the electric supply, the tensionled will lit (Power).

3. The pump starts working automatically, and within 20-25 seconds the pressure will reach approximately the maximum pressure provided by the pump. During its working, the corresponding LED (on) will be on.

4. Close the tap indicated on point 1. After 10-12 seconds, the pump will stop. The tension LED (power) will be the only one to remain on. Any problem after this procedure will be due to a defective pump priming.